Standard Cleanroom Grade Vinyl All Simplex vinyls are made from pure ingredients, no recycled materials. Simplex vinyls are formulated to be fire-retardant and low-outgassing. Refer to our data sheets for complete test results on the material required. Thicknesses: .040, .060, .080, .120, and .160 mil. Colors: Clear, frosted, white, amber tint, smoke tint, blue, grey, black and tan. Reinforced Vinyl Coated Fabric This tough, vinyl-coated polyester material is ideal for areas in your cleanroom or factory that are susceptible to frequent traffic and constant use. The vinyl is also perfectly suited for applications that require a Class 1 fire rating per ASTM E-84 flame spread and smoke test. Thickness: 18 oz. (25 mil) Colors: White, black, blue, grey, red, yellow and translucent frosted. Polysim 509 Non-outgassing, Static Dissipative Polyurethane Polysim 509 is made from an inherently static-dissipative urethane that provides permanent, non-humidity dependent ESD protection for sensitive manufacturing conditions such as computer disk drives, microelectronics, optics and aerospace. There is no plasticizer used in Polysim, making the volatile condensable contaminants extremely low. Because Polysim is an alloy using high molecular weight materials, the static dissipation properties are permanent. It does not wear off like many other materials that use only a surface coating. Polysim is also Class 1 fire rated for flame spread and smoke test. Thicknesses: .030 and .040 mil. Colors: Clear, white and black. Static Dissipative Vinyl Our ESD vinyl is built with permanent built-in inhibitors. Unlike topical coating, these inhibitors will not wear off and will last for the life of the curtain. Test result show surface resistivity of 1.8 x 1010 ohm/cm (ambient 50% R.H.) per ASTM D257. Colors: Clear, frosted, white, black and amber tint. Tested for Safety and Reliability All Simplex softwall materials are fully tested. Test results are available for fire retardancy, ESD, outgassing, sound abatement, chemical resistance and light transmission. Refer to our data sheets for complete test results on the material required. Laser and Light Blocking Curtains These specially designed softwall and curtain systems are popular for enclosing or dividing areas for special processes, such as laser functions and procedures, photo lithography and other light-sensitive work areas. Simplex's opaque black vinyl blocks out 100% of the light transfer. The matte finish reduces light refraction. Curtains are also available with foil inserts for use with more powerful lasers. Simplex amber tinted curtains filter out various degrees of blue, yellow and harmful ultra-violet light. Light wavelength tests are available for Simplex red and amber tint curtains. Thicknesses: .040 to .080 mil Softwall width: Any size Strip widths: 8" to 48" Important Liability Disclaimer: Due to the many different types of lasers, Simplex does not make any performance claims for the laser protection contained in any of our curtains used for laser applications. It is solely the end user's responsibility to test samples of the curtains and their protective linings for performance and safety and to determine their usability in a given application. Free samples will be provided for testing upon request. |